Wall Catalogue North & East

Specifications Wall Tiles Pieces/Box (nos.) Coverage/Box (sq.mtrs.) Weight/Sq. Mtr. (kgs.) Dimensions (in mm) Thickness (in mm) Work Size 200x300 7.00 15 0.900 12.17 8.40 08 0.72 15.0 150x600 (Normal / Digital) 9.40 12 0.810 14.73 150x450 (Digital) 10.50 03 0.960 17.50 400x800 (Digital) 7.90 06 0.810 13.64 300x450 (Digital) 8.80 05 0.900 14.78 300x600 (Digital) 8.80 05 0.900 14.78 300x600 (Impression) 9.30 06 0.960 16.58 400x400 (Digital) 300x300 (Digital) 7.80 10 0.900 13.33 DIGITAL WALL TILES TECHNICAL SPECIFICATION - EN Standard 14411:2016 B III , ISO Standard 13006:2012 & IS 15622 :2017 Standard Test method EN Standard 14411:2016 ISO Standard 13006:2012 Deviation in length & Width 1 S.No. IS 15622 :2017 Kajaria Standard Test Description Deviation in Thickness 2 Deviation in Straightness of Sides 3 Deviation in Rectangularity 4 5 Surface Flatness (Center& Edge curvature) 6 Warpage 7 Surface Quality 8 Water Absorption 9 Moisture Expansion 10 Linear Termal Expansion 11 Thermal Shock Resistance 12 Breaking Strength 13 Modulus of Rupture 14 Resistance to Chemical 15 Resistance to stain 16 Crazing Resistance 17 Resistance to Surface Abrasion 18 Scratch Hardness (Moh,s scale) 19 Impact Resistance(COR) 20 Frost Resistance 21 Lead and Cadmium Release ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2/ IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545-2 / IS 13630 Part 1 ISO 10545- 3 / IS 13630 Part 2 ISO 10545-10 / IS 13630 Part 3 ISO 10545-8 / IS 13630 Part 4 ISO 10545-9/ IS 13630 Part 5 ISO 10545-4/IS 13630 Part 6 ISO 10545-4 / IS 13630 Part 6 ISO 10545- 13 /IS 13630 Part 8 ISO 10545-14 / IS 13630 Part 8 ISO 10545-11 / IS 13630 Part 9 ISO 10545-7 / IS 13630 Part 11 IS 13630 Part 13 ISO 10545-5 / IS 13630 Part 14 ISO 10545-12/ IS 13630 Part 10 ISO 10545-15 Max. ±0.50% Max. ± 10.0% Max. ± 0.30% Max. ± 0.50% Max. +0.50% ,-0.30 % Max. ± 0.50% Min 95% free from visible defects Average ≥ 10 % Declared Value Declared Value 10 Cycle Min ≥ 600 N ≥ 12 N/mm² Min Class A Min Class 3 Required Abrasion Class And cycle passed NA Declared Value Declared Value Declared Value Max. ± 0.50% Max. ± 10.0% Max. ± 0.30% Max. ± 0.50% Max. +0.50% ,-0.30 % Max. ± 0.50% Min 95% free from visible defects Average ≥ 10 % Test Method Available Test Method Available Test Method Available ≥ 600 N ≥ 12 N/mm² Min Class GB Min Class 3 Required Report Abrasion Class And cycle passed NA Test Method Available Test Method Available Test Method Available Max. ± 0.20% Max. ± 5.0% Max. ± 0.15% Max. ± 0.20% Max. ± 0.30% Max. ± 0.30% Min 95% free from visible defects Average ≥ 10 % 0.04 mm/m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 600 N ≥ 12 N/mm² Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Manufacture to State Classification Min 3 0.55 Min NA NA Max. ± 0.20% Max. ± 5.0% Max. ± 0.15% Max. ± 0.20% Max. ± 0.30% Max. ± 0.30% Min 95% free from visible defects Average ≥ 10 % 0.01 mm/m Max ≤9X10¯6 K¯1 10 Cycle Min ≥ 700 N ≥ 18 N/mm² Min Class AA Min Class 1 Min. 4 cycles @ 7.5 bar Min Class - II Min 3 0.68 Min 100 Cycle Passed Cd - <1 ppm , Pb - 48 ppm

RkJQdWJsaXNoZXIy MTQ1NTA=