Ceramic Wall & Floor Tiles, Upcountry, Gujarat, Maharashtra

187 Dimensions (in mm) 200x1000mm (Rectified) 200x1200mm (Rectified) 11 11 5 4 1.00 25.00 0.96 23.00 Thickness (in mm) Pieces/box "Coverage/box (m2) "Weight/box (Kgs.)(Approx) Work Size International Standards ISO 13006:2012 Deviation in Length & Width % 200x1000mm mm# 200x1200mm mm# Deviation in Thickness Deviation in Straightness of Sides* Deviation in Rectangularity* Surface Flatness a. Centre Curvature (max.) b. Edge Curvature (max.) c. Warpage (max.) Surface Quality** Breaking Strength (thickness ≥ 7.5) Modulus of Rupture N/mm2*** Abrasion (Surface) Resistance Crazing Resistance a. Resistance to house hold chemical and swimming pool salts b. Resistance to low concentration of acids & alkalis c. Resistance to high concentration of acids & alkalis Resistance to Staining Thermal Shock Max. ± 5.0% Max. ± 0.1% Max. ± 0.1% ± 1.5mm ± 0.5mm / 1.5mm ± 2.0mm Min 95% free from visible defects Min. 95% free from visible defects. Water Absorption Avg. 3<E<6%. Individual max. 6.5% 3.0 - 4.5%, Individual. Max 5% Not less than 1000 N Min 1500 N Min. 22, Individual Min. 20 Min. 22, Individual Min. 20 ISO: 10545-4 Min. 3 ISO: 10545-7 Required 4 cycles passed at 7.5 bar ISO: 10545-11 Min. GB Manufacture is to state classification Test Method Available Test Method Available Class 3, min No Damage No Damage No Damage ISO: 10545-13 ISO: 10545-13 ISO: 10545-13 ISO: 10545-9 ISO: 10545-14 1 2 3 4 5 6 8 9 10 11 7 13 14 S.No. Our Value Method of Testing Report abrasion class and cycles passed The deviation in percent of the average size of each tile (2 or 4 sides) from the work size Sw ± 0.6 ± 1.2 / ± 2.0 ± 1.0 / ± 1.5 ± 1.0 / ± 2.0 ± 2.0 ± 1.0 / ± 2.0 ± 1.0 / ± 2.0 ± 2.0 ± 1.0 / ± 2.0 ± 2.0 ± 1.0 / ± 1.5 ± 0.5 ± 1.2 / ± 2.0 ± 5.0 ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.5 Max. ± 0.1% ISO: 10545-2 ISO: 10545-2 ISO: 10545-2 ISO: 10545-2 ISO: 10545-2 ISO: 10545-2 ISO: 10545-3 ISO: 10545-4 International Standards BIb ISO-13006:2012 and Kajaria tiles values Min. 10 cycles Resistant to Staining Chemical Resistant 12 # International standards gives the tolerances in parameters as percentage but at the same time it caps the maximum value also for the parameter. * Not applicable for tiles having curved shapes. ** Because of firing, slight variations from the standard colour are unavoidable. This does not apply to intentional irregularities of colour variation of the face of pressed tiles of low water absorption (which can be unglazed, glazed or partly glazed) or to the colour variation over a tile area, which is characteristic for this type of tile and desirable. Spots or coloured dots which are introduced for decorative purposes are not considered a defect. *** The calculation of the modules of rupture is based on a rectangular cross-section. In the case of tiles of variable thickness along the broken edge, approximate results only are produced. The shallower the relief, the more exact is it possible to make the approximations. SPECIFICATIONS GUJARAT PLANT - FLOOR TILES

RkJQdWJsaXNoZXIy MTQ1NTA=